Are you a proud owner of a dual axle travel trailer? If so, you may find yourself in a situation where you need to jack it up for maintenance or repair purposes. Jacking up a dual axle travel trailer can be a bit daunting if you’re new to it, but fear not! In this article, we will walk you through the step-by-step process of safely and effectively jacking up your dual axle travel trailer.
Step 1: Find a Suitable Location
Before you begin, ensure that you have enough space to safely jack up your travel trailer. Look for a flat, level surface that can support the weight of the trailer and the jack.
Step 2: Gather the Necessary Tools
Make sure you have all the required tools handy before you start. You’ll need a hydraulic jack, jack stands, a lug wrench, and wheel chocks to keep the trailer from rolling.
Step 3: Park and Secure the Trailer
Park the travel trailer on a level surface and engage the parking brake. Place wheel chocks on both sides of the tires to prevent any accidental movement.
Step 4: Locate the Jacking Points
Refer to your trailer’s owner manual to identify the designated jacking points. These are usually located near the wheels and are designed to bear the weight of the trailer safely.
Step 5: Position the Hydraulic Jack
Position the hydraulic jack under the first designated jacking point. Ensure that it is properly aligned and centered to distribute the weight evenly.
Step 6: Lift the Trailer
Slowly pump the hydraulic jack handle to raise the trailer. Keep an eye on the trailer as it lifts to ensure proper alignment and stability.
Step 7: Place Jack Stands
Once the trailer is lifted, position the jack stands under the frame or designated jacking points. Carefully lower the trailer onto the jack stands, ensuring that it is securely supported.
Step 8: Repeat the Process
Repeat steps 5 to 7 for the second axle, ensuring that both sides of the trailer are equally supported. This will provide stability and prevent any imbalance.
Step 9: Perform the Necessary Maintenance
With your travel trailer safely jacked up, you can now proceed with the maintenance or repairs required. Whether it’s inspecting the brakes, changing tires, or examining the suspension, take your time to ensure everything is in good condition.
Step 10: Lower the Trailer
Once you’ve completed the necessary maintenance, it’s time to lower the trailer. Use the hydraulic jack to slightly lift the trailer off the jack stands, remove the stands, and slowly lower the trailer back down.
Step 11: Remove the Jack
Once the trailer is back on the ground, carefully remove the hydraulic jack from under the trailer. Ensure that no part of your body is underneath the trailer during this process.
Step 12: Store the Tools
After successfully jacking up your dual axle travel trailer, remember to store all the tools in a safe place for future use. Keeping them organized will make the next maintenance or repair task much easier.
Conclusion
Jacking up a dual axle travel trailer may seem like a challenging task, but by following these step-by-step instructions, you can safely and effectively perform maintenance or repairs. Remember to always prioritize safety, use suitable tools, and consult your trailer’s owner manual for specific instructions. Happy travels!